Order code: CIN-01C

Name: Internal spray push button contra angle

Parameter:

push button type,Kavo type intra head 

inner water spray ,perfect cooling systerm

be compatible with FG bur or CA bur head(Φ1.60mm/Φ2.35mm)

match with E-type air motor

imported bearing

Instruction:

After each treatment,Sterilizing handpiece in autoclave according to the following steps:

1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.

2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.

3.Place into autoclaving pouch and mark.

4.Autoclave the handpiece for 12 min. at 135℃.