Order code: T-03

Name: Low and high speed dental handpiece set 

Low speed handpiece 1 set (S-10)

High speed handpiece 2 pcs (SPN-A-M4)

Features:

1. Push button type,Kavo type head

2. Inner water spray ,perfect cooling systerm

3. Be compatible with FG bur or CA bur head(Φ1.60mm/Φ2.35mm)

4. Match with E-type air motor

5. Imported bearing

6. 2 or 4 holes for choice

Instruction:

After each treatment,Sterilizing handpiece in autoclave according to the following steps:

1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.

2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.

3.Place into autoclaving pouch and mark.

4.Autoclave the handpiece for 12 min. at 135℃.